Saules panelis Jinko Tiger NEO 440w  BF N-Type JKM440N-54HL4R-V

The solar cells utilise super multi-busbar technology, which efficiently reduces losses due to microcracks, reduces the current transmission path by 50% and improves cell efficiency. The module is manufactured using Hot 2.0 technology.

The Jinko solar module is certified for use under wind and snow loads of 2400-5400 Pa. and has a high resistance to salt and ammonia. It has a low-iron, tempered front glass with high light transmission, a thickness of 3.2 mm and an anti-reflective coating.The frame is made of anodised aluminium alloy.

• Super multi-busbar technology
• PID resistance (Excellent anti-PID performance guarantee thanks to optimised mass production processes and material control)
• Positive power tolerance of 0~+3%
• High efficiency of over 22%
• Manufacturer product warranty: 15 years
• Hot 2.0 technology
• Improved mechanical resistance to external influences
• Improved low light performance

The efficient passivation contact technology is used in HOT 2.0 cells, which updates the micro-nano tunnelling through the oxide layer and the carrier-selective lamination of microcrystalline silicon thin films on the back.This advanced structure contributes to better passivation performance and electrical conductivity, increasing cell efficiency and power generation performance.Under mass production conditions, the maximum efficiency of the N-type is HOT2.0 cell is over 22% and has a broad application perspective in the near future.

Busbars are located on each PV module.These are busbars that are permanently printed on each solar cell.They pick up the direct current generated and feed it to the busbars.By using more busbars, Jinko reduces shading, shortens transport distances and reduces resistance in the modules.

Compared to P-type products, N-type cells, which are used with a different doping technology, perform better in terms of power consumption.The significant increase in the bifacial factor and the optimisation of the operating temperature also result in a higher performance gain.When it comes to the LCOE value (levelised cost of energy), the result of the analysis has been significantly reduced compared to conventional P-type modules.